Broad Featured Capability: Invasive and non-invasive support for infant (5 kg and up) to adult patients, with a flexible array of ventilation options including Pressure Control/Volume Control ventilation, SIMV/Assist Control spontaneous breath support, and stand-alone CPAP/Bilevel support.
Patient Range: Infant/Pediatric (5 kg) to Adult
Controls/Settings
Modes
Tidal Volume: 40 to 2,000 ml
RR (Respiratory Rate): 0 or 5 to 60 b/min
I Time (Inspiratory Time): 0.5 to 2.0 sec
PEEP/CPAP: 0 to 25 cmH2O/0 to 25 mbar
PS (Pressure Support)**: 0 to 25 cmH2O / 0 to 25 mbar*
*PEEP + PS cannot exceed 25 cmH2O/mbar Operating Humidity 5 to 95% non-condensing
Flow: 5 to 60 L/min (flows > 80 LPM in PS Mode, CPAP and demand flows)
Pressure Control (Target Pressure): 15 to 55 cmH2O / 15 to 55 mbar
Ptrig (Sensitivity): -5 to -1 cmH2O / -5 to -1 mbar
Manual Inflation: 2 second maximum
FiO2: .21 to 1.00
Maximum I Time: 2 seconds
Flow Wave Pattern: Square or descending**
** Based on mode selected
Auto Lock Function: ON / OFF
Remote Alarm Option: Normally Open/Closed
Monitored Parameters
Paw (Peak, Base)
Delivered Tidal Volume
Spontaneous Breath Count
Integrated Battery Level
External Battery Level – When Attached
Calculated Parameters
I:E Ratio
Flow rate
FiO2
Alarms
High Airway Pressure: 10 to 55 cmH2O/10 to 55 mbar
Low Airway Pressure: 5 to 15 cmH2O/5 to 15 mbar
Back-up Ventilation Alert: 20 second fixed, apnea ventilation mode
Low Source O2: Triggers at 40-37 psi
Low Source Air: Triggers at 40-37 psi
Device Alert: Malfunction alert
Critical Battery: Approx. 20 minutes of battery charge remains
Silence/Reset: 110 sec
Pneumatics
Gas Delivery System: Internal dual diaphragm
Air/Oxygen Mixer: Integrated
Oxygen Input: 41 to 87 psig oxygen
Power Requirements
AC Voltage: 110- 240 VAC, 50/60 Hz, max. 1A
DC Voltage: 11-15 VDC, max. 5A
Integrated Battery Parameters
Battery Composition: Sealed Lead Acid
Run time; 100% O2: 7.5 hours
Run time; 60% O2: 7.5 hours
Run time; 100% air (on compressor): 7 hours
W/ External Battery Pack Parameters (MCV-AUXBAT)
Battery Composition: Sealed Lead Acid
Run time; 100% O2: 21 hours
Run time; 60% O2: 21 hours
Run time; 100% air (on compressor): 21 hours
Dimensions & Weight
Width: 13.3″ (34 cm)
Depth: 5.3″ (13 cm)
Height: 13.8″ (35 cm)
Weight: 18.8 lbs. (8.5 kg)
Environmental
Shock: 100 G-Force
Vibration: To IEC 60068-2-6
Operating Temperature: 0° F to 122° F (-18° C to 50° C)
Storage Temperature: -40° F to 140° F (-40° C to 60° C)
Operating Humidity: 5 to 95% non-condensing
Water Ingress: IPx 22
Signal Connections
Remote Alarm: 1/4″ phone jack to connect to nurse call or remote system
Specialty Features
Quick Start: Programmable presets to quickly recall pre-determined ventilation protocols
Custom Modes: 3 additional programmable custom modes that are available for quick recall
Oxygen Conserve: Allows the use of up to 10 LPM of oxygen at 3 to 40 psi through the DISS port or up to 10 LPM of oxygen at less than 10 psi through the low pressure barb fitting for use with oxygen concentrator
You can contact us
Thank you!
Your message has been successfully sent. We will contact you very soon!
There was a problem with your form submission.
Please try again and make sure all required fields are filled out correctly.